Huge and rare 1:72nd scale B747-200 kit for sale. *SOLD*
-
- Registered Member
- Posts: 2060
- Joined: Wed Nov 22, 2006 2:22 pm
- Location: Huttonville, Ontario. Canada
Huge and rare 1:72nd scale B747-200 kit for sale. *SOLD*
I have finally decided to sell this very rare kit after owning it for 10 years and still new in box condition. I bought it from Transport Wings in UK for way more then i am selling it for. Kit is vac-form kit and will require ample model building skills. Model is 38" long with about same in wingspan +- couple of inches.
*SOLD, SOLD*
Comes with:
White metal landing gear set,
Brass photo etch detail set,
Resin flaps fairings,
Injection moulded engine intake and exhaust nozzle caps,
Super detailed decals sheet for Pan Am airlines with window and door details set.
Once built it will be one heck of beautiful model and great conversation piece if done in classic 80's PIA livery!!. You can also mount is pedestal or tri-pod type of large stands as seen on travel agency models.
Asking price: $300.00Cdn plus shipping to anywhere in the world at buyers expanse.
*SOLD, SOLD*
Comes with:
White metal landing gear set,
Brass photo etch detail set,
Resin flaps fairings,
Injection moulded engine intake and exhaust nozzle caps,
Super detailed decals sheet for Pan Am airlines with window and door details set.
Once built it will be one heck of beautiful model and great conversation piece if done in classic 80's PIA livery!!. You can also mount is pedestal or tri-pod type of large stands as seen on travel agency models.
Asking price: $300.00Cdn plus shipping to anywhere in the world at buyers expanse.
Last edited by ConnieMan on Mon Feb 02, 2009 5:21 pm, edited 4 times in total.
-
- Registered Member
- Posts: 963
- Joined: Fri Aug 06, 2004 12:23 am
Do you have pictures to share? If the box is not shrink-wrapped and the parts can be taken out (even if still in a plastic bag), a few pictures of the detail of the parts would help prospective buyers to make their purchase decision.
I know I was greatly disappointed by the Revell 1/144 744 due to it's less than accurate nose, and would have appreciated being able to see it before I shelled out the dough...
I know I was greatly disappointed by the Revell 1/144 744 due to it's less than accurate nose, and would have appreciated being able to see it before I shelled out the dough...
-
- Registered Member
- Posts: 2060
- Joined: Wed Nov 22, 2006 2:22 pm
- Location: Huttonville, Ontario. Canada
No problem Nasir, here you go....Nasir wrote:Do you have pictures to share? If the box is not shrink-wrapped and the parts can be taken out (even if still in a plastic bag), a few pictures of the detail of the parts would help prospective buyers to make their purchase decision.
I know I was greatly disappointed by the Revell 1/144 744 due to it's less than accurate nose, and would have appreciated being able to see it before I shelled out the dough...
I pulled it out of the box and its plastic bag for these pictures.
Btw Rv's 1/144 B744 has more then one issue, too much pointed nose and too much flatness on to of the cockpit area are noticeable.
Try to find one of there original releases from late 70s or early 80s, those are classic versions but 1000 times better then B744 release..
-
- Registered Member
- Posts: 963
- Joined: Fri Aug 06, 2004 12:23 am
-
- Registered Member
- Posts: 2060
- Joined: Wed Nov 22, 2006 2:22 pm
- Location: Huttonville, Ontario. Canada
I am open to fair and serious offers also, please don't shy from making them, all i will say "Sure we have a deal or Na it's not enough"....
I think it's great deal with spare wings, fin and stabs as part of the package.
I also have mod kit to turn this model into Nasa's B747 SCA 905!, it have all the bits and pieces with decals to do this conversion as long as you have Rv's 1:72 Shuttle model to go on top of it.....I will sell that conversion kit also for another $100 bucks if needed.
I think it's great deal with spare wings, fin and stabs as part of the package.
I also have mod kit to turn this model into Nasa's B747 SCA 905!, it have all the bits and pieces with decals to do this conversion as long as you have Rv's 1:72 Shuttle model to go on top of it.....I will sell that conversion kit also for another $100 bucks if needed.
-
- Registered Member
- Posts: 2060
- Joined: Wed Nov 22, 2006 2:22 pm
- Location: Huttonville, Ontario. Canada
I can't open pdf files on my PC for some weird reason but Nasir and all, i have the assembly instructions printed that came with this kit on the 2 sheets of papers.Nasir wrote:Assembly Instructions Here
-
- Registered Member
- Posts: 963
- Joined: Fri Aug 06, 2004 12:23 am
-
- Registered Member
- Posts: 2060
- Joined: Wed Nov 22, 2006 2:22 pm
- Location: Huttonville, Ontario. Canada
-
- Registered Member
- Posts: 2060
- Joined: Wed Nov 22, 2006 2:22 pm
- Location: Huttonville, Ontario. Canada
-
- Registered Member
- Posts: 2060
- Joined: Wed Nov 22, 2006 2:22 pm
- Location: Huttonville, Ontario. Canada
-
- Registered Member
- Posts: 2060
- Joined: Wed Nov 22, 2006 2:22 pm
- Location: Huttonville, Ontario. Canada
-
- Registered Member
- Posts: 2060
- Joined: Wed Nov 22, 2006 2:22 pm
- Location: Huttonville, Ontario. Canada
-
- Registered Member
- Posts: 2060
- Joined: Wed Nov 22, 2006 2:22 pm
- Location: Huttonville, Ontario. Canada